Difference between revisions of "RF modulator"
From Retro CDN
m (Categorization) |
Scarred Sun (talk | contribs) m (5 revisions imported: Import from Sega Retro) |
||
| (3 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
An '''RF modulator''' (for radio frequency modulator) is a small device that takes an input signal and outputs radio frequency-modulated signals. | An '''RF modulator''' (for radio frequency modulator) is a small device that takes an input signal and outputs radio frequency-modulated signals. | ||
| − | Most commonly these are found in home computers or | + | Most commonly these are found in home computers or video game consoles that display graphics on a television receiver. The RF Modulator takes the internal RGB, YUV, or [[composite video]] signal from a video-circuit inside the machine and generates a [[PAL]] or [[NTSC]] broadcast signal that can be fed into the television aerial socket. |
These give a relatively poor picture; some of the image quality is lost during the modulation in the source device, and some is lost again when demodulated in the television. Some televisions provide [[SCART]]-RGB or composite input, so that compatible devices can dispense with the RF modulator circuit and bypass this problem. However the aerial connector is the only one available on all TV sets, even very old ones. | These give a relatively poor picture; some of the image quality is lost during the modulation in the source device, and some is lost again when demodulated in the television. Some televisions provide [[SCART]]-RGB or composite input, so that compatible devices can dispense with the RF modulator circuit and bypass this problem. However the aerial connector is the only one available on all TV sets, even very old ones. | ||
| − | [[Category:Television | + | [[Category:Television information]] |
Latest revision as of 11:02, 26 September 2015
An RF modulator (for radio frequency modulator) is a small device that takes an input signal and outputs radio frequency-modulated signals.
Most commonly these are found in home computers or video game consoles that display graphics on a television receiver. The RF Modulator takes the internal RGB, YUV, or composite video signal from a video-circuit inside the machine and generates a PAL or NTSC broadcast signal that can be fed into the television aerial socket.
These give a relatively poor picture; some of the image quality is lost during the modulation in the source device, and some is lost again when demodulated in the television. Some televisions provide SCART-RGB or composite input, so that compatible devices can dispense with the RF modulator circuit and bypass this problem. However the aerial connector is the only one available on all TV sets, even very old ones.